| 機型 | Madel | CT6241 |
| 床身上**回轉直徑 | Max. swing over bed | 410mm (16") |
| 刀架回轉直徑 | Max. swing over cross slide | 255mm(10") |
| 馬鞍槽內**回轉直徑 | Max. swing over gap | 540mm(21") |
| 中心高 | Center height | 205mm(8") |
| **工件長度 | Distance betveen centers | 1000mm |
| 床身寬度 | Width of bed | 250mm(10") |
| 刀桿尺寸 | Max. section of tool | 20x 20mm(3/4"x 3/4") |
| 中拖板**橫向行程 | Max. travel of cross slide | 210mm(8 1/2") |
| 小拖板**縱向行程 | Max. travel of compound rese | 140mm(5 1/2") |
| 主軸通孔直徑 | Spindle bore | 52mm |
| 主軸類型 | Spindle nose | D1-6 |
| 主軸內孔錐度 | Taper of spindle speed | M.T.#6 |
| 主軸轉速范圍 | Range of spindle speed | (16) 45~1800r/min |
| 絲杠直徑和螺紋 | Leadscrew pitch | 4 T.P.I |
| 公制縱向進給范圍 | Metric longitudinal feed range | 0.05~1.7mm/rev (17 Nos) |
| 英制縱向進給范圍 | Range of inch longitudinal feeds | 0.002"~0.067"/rev (17. Nos) |
| 公制橫向進給范圍 | Range of metric cross feeds | 0.025-0.85mm/rev (17 Nos) |
| 英制橫向進給范圍 | Range of inch cross feeds | 0.001"~0.0335"/rev (17 Nos) |
| 公制螺紋范圍 | Range of metric threads | 0. 2-14mm (NO. 39) |
| 英制螺紋范圍 | Range of inch threads | 2-72 T.P.I. (NO. 45) |
| 徑節螺紋范圍/種數 | Range of Dianetrical pitch | 8-44 D.P. (21Nos) |
| 模數螺紋范圍/種數 | Range of nodule pitches | 0.3-3.5 M.P. (18Nos) |
| 尾座套筒直徑 | Dia. of tailstock sleeve | 50mm(2") |
| 尾架套筒行程 | Travel af tailstock sleeve | 120mm(4-3/4") |
| 尾架套簡錐度 | Morse taper of tailstock sleeve | M.T.#4 |
| 主電機功率 | Power of main motor | 3.0/4. 5kw |
| 水泵功率 | Power af' coolant pump | 4P,3PH 90w |
| 外型尺寸《長*寬*高) | Overall diamension(L*W*H) | 1940 x 850 x 1320mm |
| 包裝箱尺寸(長*寬*高) | Packing size(L*W*H) | 2030 x 820 x 1620mn |
| 凈重/毛重 | N.W/G.W | 1550kg/1760kg |
